- Product / model
- Pectus Bar Set
- Category
- Surgical Instruments
- Brand
- HERBERT
Documented product specifications
- Set code
- GW2ZXBT225M
- Pectus Bar lengths
- 203–406 mm
- Bar / stabilizer material
- Stainless Steel 316 LVM
- Template material
- Aluminium 1100
- Box dimensions
- 337 × 567 × 101 mm
Compare dimensions and product codes
On a small screen, scroll the table horizontally to see all columns.
Dimensions and codes from the HERBERT catalog| Item | Code | Dimensions (mm) | Listed material |
|---|
| Tunneling Short | GW2ZXBT225D | 20 × 451.3 × 81.6 | — |
|---|
| Tunneling Long | GW2ZXBT225E | 20 × 484.3 × 88.6 | — |
|---|
| Handle Bender | GW2ZXBT225F | 118 × 205 × 29 | SUS420 |
|---|
| Bending Cylinder 9.7 | GW2ZXBT225G | Ø9.7 × 19.5 | SUS420 |
|---|
| Bending Cylinder 11.7 | GW2ZXBT225H | Ø11.7 × 19.5 | SUS420 |
|---|
| Bending Cylinder 13.7/13.8 | GW2ZXBT225J | Ø13.8 × 19.5 | SUS420 |
|---|
| Lever Bender | GW2ZXBT225K | 36 × 267.3 × 56.5 | — |
|---|
| Table Top Bender | GW2ZXBT225L | 80 × 410 × 340 | — |
|---|
| Pectus Box | GW2ZXBT2221 | 337 × 567 × 101 | Aluminium 5083 |
|---|
| Stabilizer Low Profile | GD253DMZ02 | 15 × 60 × 5.3 | 316 LVM |
|---|
| Template 178 | GW2ZXBT2252 | 12.7 × 178 × 1 | Aluminium 1100 |
|---|
| Template 203 | GW2ZXBT2253 | 12.7 × 203 × 1 | Aluminium 1100 |
|---|
| Template 229 | GW2ZXBT2254 | 12.7 × 229 × 1 | Aluminium 1100 |
|---|
| Template 254 | GW2ZXBT2255 | 12.7 × 254 × 1 | Aluminium 1100 |
|---|
| Template 279 | GW2ZXBT2256 | 12.7 × 279 × 1 | Aluminium 1100 |
|---|
| Template 305 | GW2ZXBT2257 | 12.7 × 305 × 1 | Aluminium 1100 |
|---|
| Template 330 | GW2ZXBT2258 | 12.7 × 330 × 1 | Aluminium 1100 |
|---|
| Template 356 | GW2ZXBT2259 | 12.7 × 356 × 1 | Aluminium 1100 |
|---|
| Template 381 | GW2ZXBT225A | 12.7 × 381 × 1 | Aluminium 1100 |
|---|
| Template 406 | GW2ZXBT225B | 12.7 × 406 × 1 | Aluminium 1100 |
|---|
| Template 432 | GW2ZXBT225C | 12.7 × 432 × 1 | Aluminium 1100 |
|---|
| Pectus Bar 203 | GD253DMZ031 | 12.7 × 203 × 3 | 316 LVM |
|---|
| Pectus Bar 216 | GD253DMZ032 | 12.7 × 216 × 3 | 316 LVM |
|---|
| Pectus Bar 229 | GD253DMZ033 | 12.7 × 229 × 3 | 316 LVM |
|---|
| Pectus Bar 241 | GD253DMZ028 | 12.7 × 241 × 3 | 316 LVM |
|---|
| Pectus Bar 254 | GD253DMZ029 | 12.7 × 254 × 3 | 316 LVM |
|---|
| Pectus Bar 267 | GD253DMZ024 | 12.7 × 267 × 3 | 316 LVM |
|---|
| Pectus Bar 279 | GD253DMZ018 | 12.7 × 279 × 3 | 316 LVM |
|---|
| Pectus Bar 293 | GD253DMZ019 | 12.7 × 293 × 3 | 316 LVM |
|---|
| Pectus Bar 305 | GD253DMZ020 | 12.7 × 305 × 3 | 316 LVM |
|---|
| Pectus Bar 318 | GD253DMZ021 | 12.7 × 318 × 3 | 316 LVM |
|---|
| Pectus Bar 330 | GD253DMZ022 | 12.7 × 330 × 3 | 316 LVM |
|---|
| Pectus Bar 343 | GD253DMZ025 | 12.7 × 343 × 3 | 316 LVM |
|---|
| Pectus Bar 356 | GD253DMZ026 | 12.7 × 356 × 3 | 316 LVM |
|---|
| Pectus Bar 368 | GD253DMZ030 | 12.7 × 368 × 3 | 316 LVM |
|---|
| Pectus Bar 381 | GD253DMZ027 | 12.7 × 381 × 3 | 316 LVM |
|---|
| Pectus Bar 394 | GD253DMZ034 | 12.7 × 394 × 3 | 316 LVM |
|---|
| Pectus Bar 406 | GD253DMZ035 | 12.7 × 406 × 3 | 316 LVM |
|---|
Source: SPHBT2026-CAT-009 Rev.00 19.05.2026 The final bending cylinder is labeled 13.7 mm in the image and 13.8 mm in the table; confirm before ordering.
Hospital team review checklist
Request the following where applicable, using documentation for the offered model and configuration.
Engineering and compatibility
Voltage, frequency, power, battery and power-loss operation; device weight and safe working load; height range, Trendelenburg / reverse, lateral tilt and longitudinal slide; radiolucent area and C-arm clearance; rail and clamp dimensions in millimetres and supported US / EU / UK standards.
Clinical evaluation
Discuss a demonstration of intended positioning, controls and adjustment, cleaning instructions and training. Ask for available installation photographs, videos and references approved for sharing.
Warranty, service and parts
Request written terms covering structure, electrical and hydraulic warranty periods, exclusions, PM, response and on-site times, coverage, charges, loan equipment and parts lead times.
Request model specifications and service terms ↗
Before requesting a quotation
Is Pectus Bar Set compatible with our existing equipment?
Provide the make and model of your existing equipment, photographs of the connection points and your requirements so the technical team can confirm compatibility before quotation. Product names or photographs alone do not establish compatibility.
How can I request specifications and a quotation?
Pectus Bar Set: send your organization, quantity and intended application using the quotation form or email info@herbert.co.th
What should I confirm before ordering?
Request documentation for the offered model to confirm dimensions, load capacity, operating system, compatible accessories, installation and warranty terms, and applicable certification documents.
Contact sales: +66 88 564 4335
